Which filling machine is best for tea leaves?
The best starting point is net-weight, linear or multihead weighing selected around piece size, flow, fragility and target dose. Confirm it by trial because tea leaves is are light, irregular and can bridge or break, and the route must also suit pouches, bags or cartons, the fill range, cleaning regime and required good output.
What should I check first?
Record the machine state and the finished result before changing settings. This helps identify where control is first being lost.
- Confirm the production condition of tea leaves: are light, irregular and can bridge or break.
- Measure the limiting pack details for pouches, bags or cartons, including opening, stability and fill range.
- Check that product reaches the machine through a gentle wide-path hopper feed with controlled vibration.
- Measure bulk density from several parts of a production batch using the same method.
- Observe product behaviour at high, medium and low hopper level.
Why is this production problem happening?
Work from the evidence and change one variable at a time. These are the most relevant causes to investigate first.
- The selected method does not accommodate that tea leaves is are light, irregular and can bridge or break.
- Product condition changes between the sample, start-up and a sustained run.
- Pack tolerance or presentation is influencing the measured result.
- Variable bulk density or particle distribution changes the delivered quantity.
- Hopper geometry and agitation do not provide consistent presentation.
How can I correct or improve it?
Make a controlled change, repeat the same measurement and compare the result before moving to the next adjustment.
- Trial tea leaves using representative production batches and the full pack matrix.
- Use net-weight, linear or multihead weighing selected around piece size, flow, fragility and target dose.
- Plan changeover around this requirement: dry-clean and protect aroma and leaf integrity.
- Control hopper level and refill method.
- Trial auger, linear weigh, combination weigh or net-weigh methods as appropriate.
What should I send Lancing?
The most reliable recommendation is based on representative production materials and a measurable acceptance result.
- Representative sample of Tea leaves
- All relevant pouches, bags or cartons
- Target fill and tolerance
- Required accepted output
- Photographs or video of the current process
- Representative product sample and safety information
- Bulk density range, particle size and flow observations
Which applications does this answer cover?
More quick answers about this problem
What should I check first for tea leaves?+
Confirm the production condition of tea leaves: are light, irregular and can bridge or break.
Why does this problem happen with tea leaves?+
The selected method does not accommodate that tea leaves is are light, irregular and can bridge or break.
How can I improve or correct the problem with tea leaves?+
Trial tea leaves using representative production batches and the full pack matrix.
Which part of the production line does this question relate to?+
This question relates primarily to powder & granule handling. It may also be affected by upstream product or pack supply and by downstream handling, so check the full production sequence rather than one machine in isolation.
What should I send when asking for a machinery recommendation?+
Send Representative sample of Tea leaves; All relevant pouches, bags or cartons; Target fill and tolerance; Required accepted output. Representative production samples and a measurable acceptance target are normally more useful than a catalogue description alone.
Explore the relevant Lancing machinery options
Review suitable equipment and application guidance, then request a recommendation based on your product, pack and required accepted output.
weighfillers.co.uk