Which filling machine is best for spirits?
The best starting point is a filling route selected inside the hazardous-area assessment, using compatible equipment and controlled vapour and ignition risks. Confirm it by trial because spirits is is low viscosity and may create a flammable atmosphere depending on strength and process, and the route must also suit glass bottles with T-cork, ROPP or screw closure, the fill range, cleaning regime and required good output.
What should I check first?
Record the machine state and the finished result before changing settings. This helps identify where control is first being lost.
- Confirm the production condition of spirits: is low viscosity and may create a flammable atmosphere depending on strength and process.
- Measure the limiting pack details for glass bottles with T-cork, ROPP or screw closure, including opening, stability and fill range.
- Check that product reaches the machine through a controlled compatible feed system assessed as part of the hazardous-area design.
- Record ten consecutive fills by weight and note the product temperature, density or batch condition.
- Confirm the product supply remains stable at minimum and maximum hopper or tank levels.
Why is this production problem happening?
Work from the evidence and change one variable at a time. These are the most relevant causes to investigate first.
- The selected method does not accommodate that spirits is is low viscosity and may create a flammable atmosphere depending on strength and process.
- Product condition changes between the sample, start-up and a sustained run.
- Pack tolerance or presentation is influencing the measured result.
- The dosing principle is unsuitable for viscosity, particles, aeration or accuracy.
- Product conditions are changing during the run.
How can I correct or improve it?
Make a controlled change, repeat the same measurement and compare the result before moving to the next adjustment.
- Trial spirits using representative production batches and the full pack matrix.
- Use a filling route selected inside the hazardous-area assessment, using compatible equipment and controlled vapour and ignition risks.
- Plan changeover around this requirement: follow the approved flammable-liquid cleaning, isolation and ventilation controls.
- Stabilise product temperature, mixing and supply before retuning.
- Test a representative product and pack matrix across the full fill range.
What should I send Lancing?
The most reliable recommendation is based on representative production materials and a measurable acceptance result.
- Representative sample of Spirits
- All relevant glass bottles with T-cork, ROPP or screw closure
- Target fill and tolerance
- Required accepted output
- Photographs or video of the current process
- Product name and a sample or SDS where relevant
- Viscosity, temperature, particles, foaming and density
Which applications does this answer cover?
More quick answers about this problem
What should I check first for spirits?+
Confirm the production condition of spirits: is low viscosity and may create a flammable atmosphere depending on strength and process.
Why does this problem happen with spirits?+
The selected method does not accommodate that spirits is is low viscosity and may create a flammable atmosphere depending on strength and process.
How can I improve or correct the problem with spirits?+
Trial spirits using representative production batches and the full pack matrix.
Which part of the production line does this question relate to?+
This question relates primarily to filling & dosing. It may also be affected by upstream product or pack supply and by downstream handling, so check the full production sequence rather than one machine in isolation.
What should I send when asking for a machinery recommendation?+
Send Representative sample of Spirits; All relevant glass bottles with T-cork, ROPP or screw closure; Target fill and tolerance; Required accepted output. Representative production samples and a measurable acceptance target are normally more useful than a catalogue description alone.
Explore the relevant Lancing machinery options
Review suitable equipment and application guidance, then request a recommendation based on your product, pack and required accepted output.
atexfillingmachines.co.uk